GB X99-UD3 /X99/LGA2011-3

GIGABYTE GA-X99-UD3

 

• CPU Support for Intel® Core™ i7 processors in the LGA2011-3 packageL3 cache varies with CPU(Please refer "CPU Support List" for more information.)

 

• Chipset Intel ® X99 Express Chipset

 

• Memory 4 x DDR4 DIMM sockets supporting up to 32 GB of system memory

 

Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.4 channel memory architectureSupport for DDR4 3000(O.C.) / 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modulesSupport for non-ECC memory modulesSupport for Extreme Memory Profile (XMP) memory modulesSupport for RDIMM 1Rx8 memory modules (operate in non-ECC mode)• VGA -• Expansion Slots2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)

 

For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)

 

The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.

 

When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.(All PCI Express x16 slots conform to PCI Express 3.0 standard.)Š3 x PCI Express x1 slots(The PCI Express x1 slots conform to PCI Express 2.0 standard.)1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)

 

Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology

 

The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to "1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Configuration.• Storage Interface Chipset

1 x M.2 PCIe connector(Socket 3, M key, type 2242/2260/2280 SATA & PCIe x2/x1 SSD support)1 x SATA Express connector6 x SATA 6Gb/s connectors (SATA3 0~5)Support for RAID 0, RAID 1, RAID 5, and RAID 10

Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.(M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)Chipset

4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only(An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)• AudioRealtek® ALC1150 codecHigh Definition Audio2/4/5.1/7.1-channelSupport for S/PDIF Out• LAN 1 x Intel GbE LAN (10/100/1000 Mbit)

Последно добавени продукти в категорията: