1GB DDR2 1066 KINGSTON

KHX8500D2/1G
1GB 128M x 64-Bit PC2-8500
CL5 240-Pin DIMM


Kingston 128M x 64-bit 1GB
(1024MB) DDR2-1066 CL5 SDRAM (Synchronous DRAM)
memory module, based on sixteen 64M x 8-bit DDR2 FBGA
components. This module has been tested to run at DDR2
1066MHz at a latency timing of 5-5-5-15 at 2.2V. The SPD
is programmed to JEDEC standard latency 800Mhz timing
of 5-5-5-18 at 1.8V. This 240-pin DIMM uses gold contact
fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:


SPECIFICATIONS

Clock Cycle Time (tCK) CL=5 2.5ns (min.) / 8ns (max.)

Row Cycle Time (tRC)51.5ns (min.)

Refresh to Active/Refresh Command Time (tRFC) 105ns

Row Active Time (tRAS) 39ns (min.) / 70,000ns (max.)

Single Power Supply of +1.8V (+/- .1V)

Power 2.025 W (operating)

UL Rating 94 V - 0

Operating Temperature 0° C to 55° C

Storage Temperature -55° C to +125° C


• Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
• Double-data-rate architecture; two data transfers per clock cycle
• Bidirectional data strobe(DQS)
• Differential clock inputs(CK and CK)
• DLL aligns DQ and DQS transition with CK transition
• Programmable Read latency 5 (clock)
• Burst Length: 4, 8 (Interleave/nibble sequential)
• Programmable Burst type (sequential & interleave)
• Timing Reference: 5-5-5-18 at +1.8V / 5-5-5-15 at +2.2V
• Edge aligned data output, center aligned data input
• Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
• Serial presence detect with EEPROM
• High Performance Heat Spreader
• PCB : Height 1.180” (30.00mm), double sided component