AEG PROTECT A.700 UPS

AEG PROTECT A. 700

• Classification VI SY 322 acc. to IEC 62040-3 A. 700
• Power type rating 700 VA 420 W
• Part number 600 000 6436

• UPS input
Input voltage 220 V AC / 230 V AC / 240 V AC
Voltage range without battery mode 170 – 280 V AC
Frequency (automatic selection) 50 Hz / 60 Hz ±5 Hz

• UPS output
Rated output voltage / AVR technology 230 V AC
Rated output in battery mode ±10 %
Frequency in battery mode 50 Hz / 60 Hz ±1 Hz
Nominal output current (at 230 V AC) 3 A
Transfer time at mains outage 2 – 6 ms (typical)
Voltage waveform Approximated sinusoidal
Overload protection Yes

• Battery
Type Sealed, maintenance free (proprietary brand)
Autonomy time for 1 PC with 17" TFT ~20 min.
Exhaustive discharge protection / protection against excess load Yes
Charging time (to 90 % of rated capacity) 8 h
Communica tion
Interfaces USB and RS232 (with status messages measured values)
Shutdown software (on CD) Included in delivery for all major operating systems (e.g. Windows, Linux, Mac)
Alarm messages (acoustic /visual) Mains failure, overload, battery discharged, replace battery, fault

• General data
Audible noise (1 m distance) <40 dB(A)
Fanless
Operating temperature range 0° – 40 °C
Humidity 0 – 90 % (without condensation)
Operation altitude Up to 1000 m at nominal load
EMC conformity EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
Product safety EN 62040-1
Data line protection RJ11 (telephone, fax, modem)
Outputs 3 + 1 x IEC 320 C13
Equipment color Blackline
Dimensions approx. W x H x D (mm) 100 x 140 x 330
Weight approx. 6.5 kg kg
Shipment Mains input cord (1 x EU, 1 x UK), 2 device connecting cables,
management software “CompuWatch” (CD) incl. 1 network license
USB and RS232 communication cable, operating instructions
Conformity CE

Последно добавени продукти в категорията: