AEG PROTECT ALPHA 600

AEG PROTECT alpha
• Classification VI SY 322 acc. to IEC 62040-3 alpha. 600• Type rating 600 VA 360 W
• UPS InputNominal connection voltage 230 VacVoltage range without battery operation 170–280 VacFrequency (automatic detection) 50 / 60 Hz ± 5 Hz
• UPS OutputRated output voltage/AVR technology 230 VacRated output voltage in battery operation ± 10 %Frquency in battery operation 50 / 60 Hz ± 1 HzNominal output current (at 230 Vac) 2,6 A Changeover time in the event of mains failure 4-8 ms (typical)Voltage curve modified sinewaveOverload protection• BatteryType sealed, maintenance-freeAutonomy time at 120W ~ 10 min.Exhaustive discharge protection/protection against excess load Charging time (to 90% of rated capacity) 6 h
• CommunicationInterfaces USBIndicator AC mode, battery modeAudible alarms backup mode, low battery, overload, faultStatus display LED-Display
• General DataInherent noise (1m distance) < 40 dB (A)fanlessOperating temperature range 0°–40°CRelative humidity 0–90 % (without condensation)Load outputs 4 x IEC 320 C13 Overvoltage protection for data lines RJ11 (phone, fax, modem)Housing colour BlacklineDimensions approx. W x H x D (mm) 100 x 143 x 278 Weight approx. 4,4 kgScope of delivery Mains connection, 1 device connecting cable, 1 USB cable, operating instructions