AEG PROTECT alpha
• Classification VI SY 322 acc. to IEC 62040-3
alpha. 800
• Type rating
800 VA 480 W
• UPS Input
Nominal connection voltage 230 Vac
Voltage range without battery operation 170–280 Vac
Frequency (automatic detection) 50 / 60 Hz ± 5 Hz
• UPS Output
Rated output voltage/AVR technology 230 Vac
Rated output voltage in battery operation ± 10 %
Frquency in battery operation 50 / 60 Hz ± 1 Hz
Nominal output current (at 230 Vac) 3,5 A
Changeover time in the event of mains failure 4-8 ms (typical)
Voltage curve modified sinewave
Overload protection
• Battery
Type sealed, maintenance-free
Autonomy time at 120W ~ 15 min.
Exhaustive discharge protection/protection against excess load
Charging time (to 90% of rated capacity) 6 h
• Communication
Interfaces USB
Indicator AC mode, battery mode
Audible alarms backup mode, low battery, overload, fault
Status display LED-Display
• General Data
Inherent noise (1m distance) < 40 dB (A)
fanless
Operating temperature range 0°–40°C
Relative humidity 0–90 % (without condensation)
Load outputs 4 x IEC 320 C13
Overvoltage protection for data lines RJ11 (phone, fax, modem)
Housing colour Blackline
Dimensions approx. W x H x D (mm) 139 x 195 x 365
Weight approx. 5,0 kg
Scope of delivery Mains connection, 1 device connecting cable, 1 USB cable, operating instructions
- до тук 0.00 лв.
с ДДС
