AEG Protect Home. UPS
• Classification VFD SY 322 acc. to IEC 62040-3 Protect Home.
• Power type rating 600 VA 300 W
• Part number 600 001 1844
• UPS input
Input voltage 230 V AC
Voltage range without battery supply +6 % / -10 %
Frequency 50 Hz / 60 Hz ±5 Hz
Current consumption 3 A
• UPS output
Rated output voltage 230 V AC
Rated output voltage in battery mode ±10 %
Frequency in battery mode 50 Hz / 60 Hz ±1 Hz
Output current 2.6 A
Transfer time at mains outage 2 – 6 ms (typical)
Voltage waveform Modified sine wave
Overload / short circuit protection Yes
• Battery
Type Sealed, maintenance free (proprietary brand)
Autonomy time for 1 PC with 17" TFT ~ 10 min.
Overload / deep discharge protection Yes
Recharge time (to 90 % of rated capacity) 8 h
• Communication
Interfaces USB and RS232 for status and measurement levels
Shutdown software (on CD) Included for all mainstream operating systems (e.g. Windows, Linux, MAC)
Failure indicators (acoustic / visual) Mains failure, overload, battery low, fault
• General data
Audible noise (1 m distance) <40 dB(A) (fanless)
Operating temperature range 0° – 40 °C
Humidity 20 – 90 %
Operation altitude Up to 1000 m at nominal load
EMC conformity EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
Product safety EN 62040-1
Data line protection RJ11 (telephone, fax, modem)
Outputs 4 shock proof sockets (4 x surge protection, 3 x UPS protection)
Equipment color Blackline, high gloss finish
Dimensions approx. W x H x D (mm) 137 x 96 x 310
Weight approx. 3.5 kg
Shipment Mains input cord, Management software “CompuWatch” (CD),
USB and RS232 communication cable, operating instructions
Conformity CE
- до тук 0.00 лв.
с ДДС
