KIT 2X1GB DDR3 1333 KINGSTON

KINGSTON
2GB 1333MHz DDR3 Non-ECC CL9 DIMM (Kit of 2)
(KVR1333D3N9K2/2G)
- 2GB (1GB 128M x 64-Bit x 2 pcs.) PC3-10600
CL9 240-Pin DIMM Kit
- JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 5,6,7,8,9,10
- Posted CAS
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 9(DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4
which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
- Asynchronous Reset
- 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
- PCB: Height 1.180” (30.00mm), double sided component