Noiseblocker FAN 120mm NB-eLoop B12-1 800rpm

Product Description

 

The world s first high-tech compact fan with patented bionic Bionic rotor loop is from Germany. Developed with the support of the Federal Economics Ministry and the bionic Dr. Rudolf Bannasch we make with the NB-ELOOP series against the currently most advanced fan in the world. The NB-ELOOP series sets new records in almost every category and convinced by our quality product. Newly developed storage and drive as well as the tried-NB cable management and a 12-piece mounting for vibration-free mounting complement the overall unique setup.

 

The new design eliminates the edge of the vertebrae are formed between the suction and pressure side of the wing tips. The tip vortices are here broken down into smaller vortex edge and spread evenly. The resulting at the blade trailing edge tip vortex can be reduced by vorticity guides to a minimum. The result is a significant improvement in glide ratio which leads to a reduction of the aerodynamic flow induced noise and improves energy efficiency. dust-resistant super-smooth surface, original material Bayer Makrolon ®.

 

Features:

 

Bionic Fan Chassis

 

Aerodynamically optimized Abströmfeld

 

4 resonance / interference absorbers (Deep Sound Design)

 

Magnified by Einströmfeld ply construction

 

Super-linear performance throughout the rev range, flow-optimized

 

Glass fiber reinforced PBT frame Materialmassierter UL94V0 30% GF

 

NB-EKA 2 Drive

 

Auto restart function for safe start.

 

Built-in locking and overload protection.

 

NB scalable Wide Range Electronics

 

Low starting voltage

 

Speed signal line

 

AntiDust Technology (completely dust-Protected Motor)

 

NB-2 magnetic levitation bearing NanoSLI

 

Lubrication and noise reduction of vertical and horizontal operation without increasing the volume

 

AntiDust Technology (completely dust-proof bearings)

 

Lubrication with special nanotechnology for high durability and low operating noise

 

NB Cable Management

 

Plug-sheathed cable, 1x 20cm + 1 x 50cm

 

Vibration-free mounting

 

The included 12-piece mounting kit allows for vibration-free assembly, which reduces the operating noise when installed.

 

Warranty

 

Six years, according to NB warranty terms

 

Specifications:

 

Dimensions

120 x 120 x 25 mm

Speed

800 RPM ±10%

Noise

7.83

Max. Airflow

33.7 CFM 57.3 m^3/h

Static Pressure

0.585 mmH2O

Bearing

NB-2 magnetic levitation bearing NanoSLI®

Voltage Range

5.4 - 12.0 V DC

Starting Voltage

5.4 V DC

Input Current

0.03A

Input Power

0.33W

MTBF at 25°C

160,000 hrs.

Operating Temp.

-10°C to +60°C

Chassis Material

PBT 30%GF

Impeller Material

Bayer Makrolon (PC)

Vibration Dampening Material

Silicone Mix

Weight

123g

Warranty

6 Years

Последно добавени продукти в категорията: