REP CAMERA CASE TH-500 HTR+FAN

- SPECIFICATIONS
Entirely made of die-cast aluminium Light ivory powder coating finished
Dimensions: 250L*100W*95H mm, Max. load: 35Kgs
Supplied with: BR-18 Fully-cable management bracket, and accessories for camera/lens installation
CE in compliance with EN 60335-1:1994 IP44 (with cable glands) in compliance with IEC 60529

- MECHANICAL
- movable cable glands: PGA11 x 2 Level IP68
- Inner space for camera : W105 x H80 x L250 mm
- Tempered glass window (WxH): 95 x 80 x 4 mm

- Electric
12VDC Blower: Turn on at 35 C +/-3C; Turn off at 25C +/-3C ; 39 CFM
POWER SUPPLY EP 2028:
Two 90~264VAC inputs / Four 12VDC outputs
Rating Current: Continuous 3A DC / Typical 3.5A DC
Ripple below 100mV, Conform With Safety Standard
3 way terminal block with 3 Amp. Fuse / Spare 6 way terminal block
UL 1015#18 brown/blue/green-yellow wires

22AGW Silicone rubber insulated with glass fiber braided wire

www.repotec.com