SAVER PLUS DSP 10KVA 3/1 W/BA

- Power (kVA)
10

- Input
Nominal Voltage 380V / 400V / 415V 3Phase, N
Minumum Voltage 140V 3Phase, N
Minumum Voltage (at full load) 260V 3Phase, N
Maximum Voltage 480V 3Phase, N
Frequency 50 - 60Hz (45 to 65 Hz)
Nominal Current 11.8 A / phase
Maximum Current 36 A peak / phase
Power Factor >0,97

- Output
Power Factor 0.7
Nominal Voltage 220 /230V (adjustable)
Wave Form Sinus
Total Harmonic Distortion < 3%
Frequency 50Hz or 60Hz (adjustable)
Voltage Regulation (Static) 1%
Crest Factor 3
Overload >30s (at 150 % load)
Total Efficiency >91%

- Battery
Type Maintenance-free lead acid batteries
Quantity (pcs) 20
Recharging Time < 4 h
Discharge Current Wave < 10%

- Display
LED Panel Line, Bypass, Battery, Inverter, Overload, Fault Indicators
LCD Panel Load%, Battery Temperature, Input&Output&Battery Voltages, Output Frequency

- Static bypass
Voltage Tolerance 10% (adjustable)
Frequency Tolerance 3Hz (adjustable)
Transfer Time 0 ms

- Protection
Overload Protection, Short Circuit Protection, High Temperature, Over Voltage, Over Current

- Communication interface
Interface (Communication Ports) RS 232
Dry Contact Signals Ups shutdown, mains failure, low battery, by-pass active, summary alarm

- Environment
Temperature 0 - 40°C
Suggested Temp. to extend battery life 20 - 25°C
Humidity < 95%
Acoustic Noise <55dB from 1m distance
Protection Class IP 20

- Physical
Net Weight (without battery) 55 kg
Dimensions (mm) WxDxH (mm) 270x730x780

- Standards
EN 62040-1-1 (safety), EN 62040-2 (EMC)

www.informups.com

The specification and pictures are subject to change without notice.