INFORM Sinus SS LCD 220
• Input
Power (kVA) 2
Voltage 160 - 288 VAC
Frequency 50 / 60 Hz. ± 5 % (Auto Sensing)
Power Factor >0.99
• Output
Power Factor 0.8
Voltage 220VAC / 230 / 240 VAC
Voltage Regulation ±%1
Frequency 50 / 60 Hz (Auto Detection)
Frequency Regulation ±0,1%
Harmonic Distortion < 3 %
Crest Factor 3:1
Overload Capacity 100% - 120% for 30 seconds, 120% - 150% for 10 seconds
Whole efficiency >85%
Inverter efficiency >90%
Transfer Time 0ms
• Battery
Battery Type Maintenance-free lead acid batteries
DC Voltage 72V
Internal Battery 6pcs 12V 7Ah
Built in max. charge current 2.1A
Back Up Time Full Load 7 min
Half Load 20 min
Recharge Time 3 Hours (to 90% Of Full Capacity)
• Display
LCD Display Input/Output Voltage And Frequency Valuers,
Load%, Battery voltage, Internal Temperature
LED Indicators Utility Or By Pass, Battery Low, Battery Abnormal, Overload, Site Wiring Fault,
Service Mode, Ups Off, Ups Abnormal Indicators
• Alarms
Line Failure, Battery Low, Over Load, Failure Events
• Protection
short circuit, over temperature, overload, high voltage, battery low,EPO
• Communication
Interface
(Communication Port) RS-232 and USB
Slots Relay Contact Board, SNMP/WEB Card
• Environment
Temparature 0°C - 40°C
Humidity 0%-90%
Noise Level (1m Distance) <50dBA (at 1 meter)
Protection Class IP20
• Physical specifications
Outlets 6 pcs IEC or 2pcs Schuko
Dimensions (mm) WxHxD 440x88x650
Net Weight (kg) 29.5
• Standards
Standards EN 62040-1-1 (safety), EN 62040-2 (EMC)
www.informups.com
The specification and pictures are subject to change without notice.
- до тук 0.00 лв. / 0.00 €
с ДДС
