SM MBD-X10SLQ

SUPERMICRO X10SLQ 

• Product SKUs
MBD-X10SLQ -B
X10SLQ (Bulk Pack)

• Physical Stats
Form Factor
uATX
Dimensions
9.6" x 9.6", (24.4cm x 24.4 cm)

• Processor/Cache
CPU
Intel® 4th Gen Core i3/i5/i7, Pentium, Celeron processors
Single Socket H3 (LGA 1150)

• System Memory
Memory Capacity
4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 non-ECC Un-Buffered memory (UDIMM)
Memory Type
1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
8GB, 4GB, 2GB, 1GB
Memory Voltage
1.5V, 1.35V

• On-Board Devices
Chipset
Intel® Q87 Express Chipset
SATA
SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST
Network Controllers
Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
RealTek ALC888S 7.1 High Definition Audio
VGA
Intel HD 4600 Graphics
Super I/O
NCT6776D

• Input / Output
Serial ATA
6x SATA 3.0 ports (6Gbps) including 1x mSATA
LAN
2x RJ45 Gigabit Ethernet LAN ports
USB
4x USB 3.0 ports (2 rear, 2 via header)
8x USB 2.0 ports (4 rear, 4 via headers)
Audio
7.1 HD Audio header and rear I/O
Display
1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
Serial Port / Header
4x COM ports (headers); COM2 with RS422/485 support
DOM
SATA DOM (Disk on Module) power connector support
Security
1 TPM 1.2 20-pin Header
Others
PS/2 connector for mouse and keyboard

• Chassis ( Optimized for X10SLQ )
Mid-Tower
CSE-731D-300B
CSE-731i-300B
CSE-732D2-500B
CSE-732D2-865B
CSE-732D2-903B
CSE-732D4-500B
CSE-732D4-865B
CSE-732D4-903B
CSE-732D4F-500B
CSE-732D4F-865B
CSE-732D4F-903B
CSE-732i-500B
CSE-732i-865B
CSE-733i-300
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

• Expansion Slots
PCI-Express
1x PCI-E 3.0 x16 (in x16) slot
1x PCI-E 2.0 x4 slot
1x PCI-E 2.0 x1 slot
1x Mini-PCI-E w/ mSATA support

• System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support

• Management
Software
SuperDoctor® III
Watch Dog
AMT
NMI
vPro
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

• PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of four 4-pin fan headers supporting up to 4 fans
4x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Adaptive Thermal Monitor, PECI 3.0
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header 

Последно добавени продукти в категорията: