SUPERMICRO X9SCM-F
• Physical Stats
Form Factor Micro ATX
Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)
• Processor/Cache
CPU Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors
Socket H2 (LGA 1155)
• System Memory
Memory Capacity 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1333/1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V
Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)
• On-Board Devices
Chipset Intel® C204 PCH chipset
SATA 4x SATA2 (3Gbps) w/ RAID 0, 1, 5, 10 2x SATA3 (6Gbps) w/ RAID 0, 1
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® 82579LM and 82574L, 2x Gigabit LAN ports
Virtual Machine Device Queues High efficient I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA BMC integrated Matrox G200
Super I/O Nuvoton NCT6776F
• Input / Output
6 SATA ports
6 SATA hard drives supported
LAN 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
9x USB 2.0 ports total (2x rear + 6x via header + 1x type A)
1x VGA port
2x Fast UART 16550 serial port (one header and one rear port)
1x DOM (Disk on Module) power connector
1x TPM 1.2 20-pin Header
• Chassis ( Optimized for X9SCM-F )
1U Chassis
CSE-113MTQ-330CB
CSE-512F-350B
CSE-512F-441B
CSE-811TQ-R441B
CSE-813MTQ-350C
CSE-813MTQ-441CB
CSE-813MTQ-R400CB
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
• Expansion Slots
2 (x8) PCI-E 3.0 in x8 slots
2 (x4) PCI-E 2.0 in x8 slots
• System BIOS
BIOS Type 64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3
• Management
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
• PC Health Monitoring
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
• FAN
Total of 5 fan headers supporting up to 5 fans
Five 4-pin fan headers
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED +5V Standby alert LED
Other Features Chassis intrusion detection Chassis intrusion header