Sapphire HD7970 VAPORX GHZ EDITION 3G GDDR5

SAPPHIRE HD 7970 3GB Vapor-X Edition has the latest GDDR5 memory clocked at 6000MHz effective, and runs with a core clock speed of 1000 MHz which with PowerTune Dynamic Boost rises to 1050 MHz on the engine. It has a slightly less sophisticated 8-phase power design and the versatile output configuration of Dual-link DVI-I, DVI-D, HDMI and DisplayPort.

 

The Vapor-X cooler is based on a new vapor chamber designed especially for this series. Heat is carried away by four heatpipes (2 x 8mm plus 2 x 6mm), and finally dispersed by two 90mm fan with aerofoil blades and dust repelling bearings. The Vapor-X cooler easily handles the heat generated from the HD 7970 GHz Editions even under extreme load conditions.

 

Specification

 

Output 1 x HDMI (with 3D)

 

1 x DisplayPort

 

DisplayPort 1.2

 

Dual-Link DVI-I

 

Single-Link DVI-I

 

GPU 1000/1050(Boost) MHz Core Clock

 

28 nm Chip

 

2048 x Stream Processors

 

Memory 3072 MB Size

 

384 -bit GDDR5

 

6000 MHz Effective

 

Dimension 285(L)x135(W)x45(H) mm Size.

 

2.5 x slot

 

Software Driver CD

 

SAPPHIRE TriXX Utility

 

Accessory CrossFire™ Bridge Interconnect Cable

 

8 PIN to 4 PIN Power Cable

 

DVI to VGA Adapter

 

6 PIN to 4 PIN Power Cable

 

HDMI 1.4a high speed 1.8 meter cable(Full Retail SKU only)

 

System Requirements

 

PCI Express® based PC is required with one X16 lane graphics slot available on the motherboard.

 

2X75 Watt 6-pin PCI Express power connector is required for CrossFireX™ system.

 

1X75 Watt 6-pin PCI Express power connector is required.

 

Certified power supplies are recommended. Please refer to

http://support.amd.com/us/certified/power-supplies/Pages/listing.aspx

1024MBMinimum of system memory.

 

Installation software requires CD-ROM drive.

 

DVD playback requires DVD drive.

 

Blu-ray™ / HD DVD playback requires Blu-ray / HD DVD drive.

 

500 Watt Power Supply is required.

 

850WattPower Supply is recommended for CrossFireX™ System.

 

1X150 Watt 8-pin PCI Express power connector is required.

 

2X150 Watt 8-pin PCI Express power connector is required for CrossFireX™ system.

 

64-bit operating system highly recommended

 

Use of 3 or more displays with AMD Eyefinity technology requires a DisplayPort-capable panel or an AMD Eyefinity-validated dongle.

 

PN

11197-12-40G

Последно добавени продукти в категорията: