KINGSTON
2GB DDR3 1600 HYPER X KINGSTON
(KHX1600C9D3/2G)
- 2GB 256M x 64-Bit DDR3-1600MHz
CL9 240-Pin DIMM
-
SINGLE-CHANNEL MEMORY MODULE
-
JEDEC standard 1.5V ± 0.075V Power Supply
-
VDDQ = 1.5V ± 0.075V
-
667MHz fCK for 1333Mb/sec/pin
-
8 independent internal bank
-
Programmable CAS Latency: 5,6,7,8,9,10
-
Posted CAS
-
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
-
Programmable CAS Write Latency(CWL) = 7(DDR3-1333)
-
8-bit pre-fetch
-
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4
which does not allow seamless read or write [either on the fly using A12 or MRS]
-
Bi-directional Differential Data Strobe
-
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
-
On Die Termination using ODT pin
-
Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
-
Asynchronous Reset
-
PCB : Height 1.180” (30.00mm), double sided component